Home / Services / Blown-In Insulation
Attics, Walls & Retrofits
Blown-In Insulation in Hamshire, TX
Blown-in fiberglass and cellulose for attic floors and retrofit walls on ranch houses, farm homes and country properties.
Blown-in insulation earns its place on Hamshire area homes because real attics are rarely neat rectangles. Older ranch houses have cross bracing, decades of repairs, duct chases and additions that changed the ceiling line over time. Loose material flows around those obstructions and levels across open spans better than batts that get cut around every pipe. Hamshire Spray Foam Insulation installs blown-in fiberglass and cellulose for attic floors, top-ups and closed wall cavities, with spray foam recommended only where the assembly truly calls for it.
Fiberglass or cellulose
Blown-in fiberglass is spun glass that resists moisture absorption and tends to hold depth with less settling, a real advantage in our humid Gulf Coast air. Cellulose is recycled paper treated for fire resistance, and it packs densely around irregular framing while slowing air movement through the layer. Both can perform well in zone 2A when installed to the right depth and paired with air sealing at the ceiling plane. Fiberglass often costs a bit more and settles less; cellulose can be a strong value on big attic floors. We carry both and explain the tradeoff without steering you toward whatever is on the truck.
Depth is the job: R-value explained plainly
R-value measures resistance to heat flow, so a higher number means heat moves more slowly through the layer. For blown-in material, R-value comes mostly from installed depth: more target R-value means more inches on the attic floor. Zone 2A calls for substantially more attic depth than most older rural homes carry, because the cooling season here runs from spring well into fall. That is why we quote depth in writing and set markers across the attic instead of judging by eye or by bag count alone.
Top-ups of existing attics
If the material already in your attic is dry, clean and simply too thin, a top-up can bring it to target depth without a full removal. Before adding anything we check for active roof leaks, pest damage, bath fans dumping into the attic and open soffit paths that need baffles. We also look for ceiling air leaks around lights, chases and attic access points, because added depth works best when the air pathway is controlled first. For the broader attic picture, see our attic insulation page.
Retrofit walls on older rural homes
Many older wood-frame farm and ranch homes near Winnie and Fannett have empty wall cavities or settled material that leaves hot strips at outlets and baseboards all summer. Dense-pack blown-in cellulose or fiberglass can fill those walls through small patchable holes, drilled from inside or outside depending on siding and access. It is a practical retrofit for country properties because it improves comfort without gutting rooms, and it can soften sound between bedrooms, shops and living areas.
Get a measured, written quote
Every blown-in estimate names the material, target depth, square footage and any prep such as baffles or air sealing. Call 409-498-6078 or use the quote form to schedule a free attic or wall inspection in Hamshire, Winnie, Fannett, China, Nome, Beaumont, Port Arthur, Nederland and the communities listed on our service areas page.
Questions
Common questions
Fiberglass or cellulose: which is better?
Both are proven when installed to the right depth. Fiberglass generally settles less and shrugs off Gulf Coast humidity better; cellulose packs tightly around framing and can cost less installed. We recommend from the attic conditions, not from a one-product script.
Does blown-in insulation settle over time?
Loose-fill products settle somewhat, cellulose more than fiberglass. We account for that in the installed depth so the settled layer still meets the target named in your estimate, and depth markers let you verify coverage.
Can you blow insulation into existing walls?
Yes. Dense-pack material fills closed cavities through small holes that are patched afterward. It is a common retrofit for older rural homes near Winnie and Fannett whose walls were never insulated or have settled thin.
Want to know what your attic or walls would cost?
We measure the space, check prep needs and quote the material and depth in writing before work is scheduled.
Free written estimates • No obligation • Local team
Explore more
Other insulation services
Attic InsulationFull attic upgrades: air sealing, ventilation protection and the right material at the floor or the roof deck.Explore service →
Spray Foam InsulationOpen-cell and closed-cell spray foam that insulates and air seals in one pass, for assemblies where foam is the right call.Explore service →